Ideal Aerosmith's 1270VS rate table can turn in both clockwise and counterclockwise directions.
1231 Data Sheet

The Ideal Aerosmith 1231 is designed to apply a large centrifugal force to a payload. While this can also be accomplished with a single-axis motion simulation table system, a centrifuge is typically required for applications with larger payloads, and/or higher G requirements. The 1231 tests from 0 to 200 G’s at a 44-inch (1118 mm) radius. Payload capacity is a 24 inch cube (610 mm) at 200 lbs. (91 Kg) per arm.

Ideal Aerosmith centrifuge solutions are used in many industries, including aerospace, automotive, geo-technical and the military. Often this is in the qualification testing of accelerometers, inertial packages or safe-arming devices (fuzes).

Features of the 1231

  • G-Range: 0 to 200 G’s at 44-inch (1118 mm) radius
  • Maximum G-lbs: 20000 G-lbs
  • Payload Capacity: 24 inch cube, (610 mm); 200 lbs. (91 Kg) per arm
  • Rate Range: 0-400 RPM
  • Slip Rings: 108 lines at 3A per line
  • Drive System: 15 H.P. D.C. motor
  • Control: AERO 4000 Controller with centrifuge-specific GUI
  • Testing radius: UUT location is adjustable within mounting platform, 30-54 inch radius (762-1372 mm)
  • Stability: ≤0.1% of operating rate above 40 rpm. Zero drift.
  • Speed Indication Accuracy: 0.01% ± 0.02 RPM (measured over 1 revolution)
  • Vibration Isolation: Less than 0.1 G from 0.5 – 100 Hz Bi-Axial measured at UUT Mounting Platform
  • Power: 230VAC, 3 phase, 60 Hz, 65 A (70 A service)
  • Mounting Platform: 24 inches x 24 inches horizontal platforms located at each end of the rotating arm
  • Dimensions:
    Centrifuge: 122.2 in. wide x 121.2 in. deep x 78.6 in. high (3103 x 3078 x 1996 mm)
    Console: 24 inches wide x 30 inches deep x 70 inches high (610 x 762 x 1778 mm)
    Drive isolation Transformer: 26 in. wide x 22 in. deep x 34.5 in. high (660 x 559 x 876 mm)
  • Approximate Centrifuge Weight: 6100 lbs. (2765 Kg)
  • Other Standard Features: Unbalance Sensor provides automatic machine shut down in event of unbalanced loads; Electrical door interlocks prevent enclosure from being opened while machine is in motion; Dynamic Braking System

 

Options of the 1231

  • Custom slip ring configuration
  • Camera viewing system
  • Fluid transfer joint
  • Coaxial rotary joint
  • Positionable platforms