 Series 1503 Manual Positioning Table
Description:
The Ideal Aerosmith Model 1503-TS-SPL test table is a three-axis non-magnetic manual positioning table. This table can be used for the calibration of downhole directional instruments including magnetometers, gyroscopes, and accelerometers.
The table is constructed of aluminum, brass, and phenolic. The table has three orthogonal axes to enable the instrument to be placed in various orientations. The outer axis (azimuth) can be positioned every 90° using the shot pin. The middle axis (inclination) has an engraved dial and a brake so the axis can be held in any position. The work surface is attached directly to the middle axis. The work surface provides a flat surface for mounting V-Blocks to allow cylindrical packages to be rotated about their own axes. Ovens also attach to the work surface to provide the capability to perform the testing over a large temperature range. The usable work space inside the ovens is 6W x 72D x 6H inches (152W x 1829D x 152H mm). An optional blower fan assembly can be installed for improved heat distribution.
Temperature heating is accomplished using silicone strip heaters. The work space is covered by two ovens. Each oven has its own thermocouple and is controlled separately to minimize temperature gradients. The temperature controller is a dual-zone controller and can be configured to have separate set points or a single set point for the two zones.
View 1503 data sheet
|
