Centrifuge Systems

Ideal Aerosmith manufactures a variety of single-axis motion systems capable of applying a controlled centrifugal force to a test article. For many smaller payloads, an Ideal Aerosmith single-axis table system with an optional safety enclosure, such as the 1621-200A, 1571 or 2001P Series, can be used for G force testing. For larger payloads, Ideal Aerosmith manufactures the 1068-1, 1068-2, 1077, 1221 and 1231 Series Centrifuge Systems. The combination of these systems cover of wide range of G testing requirements ranging from microelectronic devices up to 200 lbs, and from 1 to 1000 G’s.

Ideal’s centrifuge line can be used for aerospace, automotive, geo-technical and military applications, such as qualification testing of accelerometers, inertial packages, or safe-arming devices (fuzes).

Ideal’s expertise in this area derives not only from decades of experience building precise single-axis table systems, but also from our year 2000 purchase of the Genisco Technology and Trio-Tech International rate table and centrifuge line. Ideal offers service, support and upgrades for legacy Genisco and Trio-Tech centrifuges.

Centrifuge Systems

Centrifuge Systems

Centrifuge Systems are designed to apply a large centrifugal force to a payload. While this can also be accomplished with a Single-Axis motion simulation table system, a centrifuge is typically required for applications with larger payloads, and/or higher G requirements.

1221 / 1231 Series Centrifuge Systems

1221 / 1231
The Ideal Aerosmith 1221 and 1231 Series of Centrifuge Systems are used to simulate G loads for inertial sensors, devices and components. These systems are designed for applications with larger payloads.
  • G-Range: 0-250
  • 1221 Payload capacity: 200 lbs (90.7 Kg) per arm, 18 x 18 x 18 in. (45.7 cm) per arm
  • 1231 Payload capacity: 200 lbs (90.7 Kg) per arm, 24 x 24 x 24 in. (310 mm) per arm
  • Maximum G-lbs: 20,000
 MORE