1310-L Series Manual Tilt and Turn Table

The 1310-L Manual Tilt and Turn Table consists of two axes of motion, one for tilting and the other for rotating the table. It can be tilted in either direction from 0° to 80°, or 0° to 90°, depending upon the model. Rotating the handle in the desired direction will change the tilt six degrees per revolution.

The vernier on the tilt axis is readable to one minute of arc with the vernier adjustable to ± 5°. There are engraved marks at 0.5° increments on the tilt axis.The table top rotates continuously through 360° in a clockwise or counter-clockwise direction. Engraved marks are provided at 45° increments on the table top; engraved marks at 1° increments are optional. A spring-loaded steel ball engages detents in the bottom of the table top, locking it into position for quick setup. The detents are located every 45°. Tables with optional engraved marks every 1° have detents every 15°. The tension is adjustable for the positioning detents on the tabletop.

The table includes two one-minute sensitive levels on the table base for a more accurately leveled table surface. A level platform is achieved by adjusting the leveling screws, which are mounted through the base plate. The leveling feet can compensate for as much as 5° of tilt.

The top surface of the table has six tapped holes for attaching the instrument package to be tested. Simply center the instrument package on the table top and secure it. Knurled mounting screws (1/4 - 20) may be purchased separately.

  • 1310-L
Options available for

1310-L

  • Model 1310-L
    1. Tilt range: ±80º
    2. Engraved increment on azimuth axis: 45º
  • Model 1310-L-90
    1. Tilt range: ±90º
    2. Engraved increment on azimuth axis: 45º
  • Model 1310-1-L
    1. Tilt range: ±80º
    2. Engraved increment on azimuth axis: 1º
  • Model 1310-1-L-90
    1. Tilt range: ±90º
    2. Engraved increment on azimuth axis: 1º

     

Downloads

PDF files will open in browser upon download.
PDF 1310-L Manual Tilt and Turn Table 223 kB - pdf DOWNLOAD
PDF Mounting Brackets for the 1310-L Manual Tilt and Turn Table 246.1 kB - pdf DOWNLOAD
PDF Adapter Plates for the 1310-L Manual Tilt and Turn Table 246.1 kB - pdf DOWNLOAD

Standard Performance Specification & Features:

Small and lightweight for easy bench mounting and manual operation
Two degrees of freedom for tilting and rotating test instruments
Spring-loaded detents provide accurate table top rotary indexing
Flat, precision-ground table top mounting surface
Anodized aluminum construction for durability and corrosion resistance
Sensitive bubble levels for accurate table leveling
Knurled mounting screws are available for easy instrument package mounting