Legacy Products

IDEAL AEROSMITH SUPPORTS A WIDE RANGE OF LEGACY MOTION SYSTEMS. 

Ideal Aerosmith is dedicated to supporting legacy motion systems produced by us or by other manufacturers, including Carco Electronics™, Contraves®, Contraves-Goerz, Fecker Systems, Benton, Genisco, Trio-Tech, and others.

If your legacy system is not listed here, please contact us with the make and model of your legacy system which requires support.

Legacy Products

Legacy Products

Ideal Aerosmith is dedicated to supporting legacy motion systems produced by us or by other manufacturers, including Carco Electronics™, Contraves®, Contraves-Goerz, Fecker Systems, Benton, Genisco, Trio-Tech, and others.

AERO 900 Test Table Controller

AERO 900

Designed for: 

  • Controlling single-axis and multi-axis test tables with unparalleled accuracy and precision
  • The AERO 900 was replaced by the AERO 8x2 and AERO 4000™ Controllers.

2103 Series Three-Axis Table Systems

2103
2103 Series Three-Axis Table Systems: Cost-effective solution for testing antenna stabilization systems. This table produces what is often referred to as an “ocean motion” stimulus.
  • Payload Capacity: 100 lbs (46 Kg)
  • Max Rate: 
Inner axis: 100 deg/sec
 Middle axis: 65 dec/sec
Outer axis: 65 deg/sec
  • Position Accuracy: ±60 arcsec
  • Thermal Options: Not available

1621-200A Table Systems

1621-200A
Production or Development testing of most inertial sensors and packages.
  • Payload Capacity: 200 lbs (90.7 Kg)
  • Max Rate: 1000 or 3000 deg/sec
  • Position Accuracy: ±15 arcsec
  • Rate Accuracy: ±0.01%
  • Thermal Options: 

  1. LN2-cooled 

  2. CO2-cooled

  3. Mechanical Refrigeration

1571 High-Speed Rate Table Systems

1571
High velocity testing up to 50 Hz (18,000 deg/sec). Available in a spin fixture or traditional single-axis table base configuration.
  • Payload Capacity: 50 lbs (22.68 Kg)
  • Max Rate: 18,000 deg/sec (50 Hz)
  • Position Accuracy: ±36 arcsec
  • Rate Accuracy: ±0.01%
  • Thermal Options: 

  1. LN2-cooled 

  2. CO2-cooled

1562 Series Rate Table

1562

Designed for: 

  • Performance testing and calibration of inertial navigation systems and their components.
  • The 2102 Series is similar to the 1562. It is not man-portable, but is superior in performance characteristics.

1411E / 1412E Series

1411E / 1412E
Simulating the roll, pitch, and yaw motions of an aircraft during flight.

Designed for:

  • Payload Capacity: 40 lbs (18kg)
  • Tilt Range: 0 to 15° indefinitely, adjustable
  • Max Cycles: 6 cycles
  • Mounting Platform Dimension: 10 x 10in (254 x 254mm), square pattern
  • Operating Controls: Front panel

1291BR Table Systems

1291BR
Designed specifically for testing today’s smaller MEMS-based sensors and packages.
  • Payload Capacity: 50 lbs (22.7kg)
  • Max Rate: 2000 deg/sec
  • Position Accuracy: ±15 arcsec
  • Rate Accuracy: ±0.01%
  • Thermal Options: 
1. Mechanical Refrigeration 
2. LN2-cooling with tilt stand

legacy-1280T Series Rate / Positioning Table

1280T
Designed for:
  • Providing precise position, rate and acceleration motion for the development and production testing of rate and position sensors.
  • Replaced by the 1291T-TL

1100-5B Table Systems

1100-5B
Replacement for Genisco Technology/Trio Tech International 1100-5 Series Table System
  • Payload Capacity: 250 lbs (113 Kg)
  • Max Rate: 3200 deg/sec
  • Position Accuracy: ±15 arcsec
  • Rate Accuracy: ±0.01%
  • Thermal Options: Not available

1077 Centrifuge System

1077
The 1077 Series Centrifuge System is used to simulate G loads for inertial sensors, devices and components.

16-13-8A Series Vacuum Instrument Test chamber

16-13-8A
The Model 16-13-8A Test Chamber allows the operator to test up to eight instruments at one time. The welded steel construction assures a broad margin of strength and safety.
  • Internal Dimensions: 20L x 14H x 14W inches
  • Operating Pressure: 0.002 to 50 absolute PSI
  • Capacity: 8 instruments

16-11-2 Series Vacuum Instrument Test Chamber-legacy

16-11-2
The Model 16-11-2 Test Chamber is designed to test two instruments at a time. Complete with an aluminum alloy door and optional mounting brackets, this model is affordable and efficient.
  • Internal Dimensions: 10.5L x 5.5H x 12W inches
  • Operating Pressure: 0.002 to 35 absolute PSI
  • Capacity: 2 instruments

17-53-3B/C Series and 18-53-4B/C Series Tachometer Tester

17-53-3B/C
Testing and calibration of multiple electrical and mechanical tachometer generators and indicators at the same time.
  • RPM Range: 17-53-3B/C: 180-5000 drive, 18-53-4B/C: 60-1750 RPM on center, 240-7000 RPM on end drives
  • RPM Accuracy: ±1 RPM
  • Units: RPM
  • Drive Outlet:
  • 17-53-3B/C: 2 AN screw mount pads in front, 1 pad inside
  • 18-53-4B/C: 3 AN screw mount pads in front, 1 pad inside