Multi-Axis Table Systems
Ideal Aerosmith Multi-Axis test tables provide precise angular position,
rate and acceleration stimuli for development and production testing of multi-axis
inertial systems, packages or clusters.
For most systems, Ideal offers integral temperature chambers and/or vacuum chambers
so that units under test can be burned-in and characterized over temperature or
pressure ranges.
Ideal offers a wide variety of two and three-axis table systems to accommodate a
wide variety of testing requirements. In addition to the standard performance characteristics
and features, we can modify existing designs or build a fully custom table system
to meet your specific requirements.
A listing of the standard table series with a few basic specifications can be found
below. The Two and Three-Axis
Product Selection Matrices include additional specifications and allow you
to easily compare the primary standard specifications for each of the table systems.
It is important to note that most of our table systems can be customized. Common
options include:
- Larger tabletops to increase payload mounting area
- Limited or unlimited range of axis motion
- Higher acceleration or maximum velocity
- Variety of slip ring packages for unlimited rotation axes
- Fiber Optic or RF rotary joints
- Integral Temperature Chambers with cooling supplied by LN2, CO2, or mechanical refrigeration
- Communication Interfaces including real-time interfaces (SCRAMNet +, SCRAMNet GT, VMIC)
- Additional Test Services tasks
including mechanical fixturing, test article harnesses, custom software, data acquisition
equipment, etc. Refer to Test Services for more of our capabilities in this area.
View the Multi-Axis Product Selection Matrix
Two-Axis Table Systems
2102 Series Two-Axis Table Systems: Designed for applications with small payloads, low dynamic performance, and moderate accuracy requirements.
- Payload Capacity: 40 lbs (68 Kg)
- Max Rate:
Inner axis: up to 1000 deg/sec
Outer axis: up to 300 deg/sec
- Position Accuracy: ±30 arcsec
- Thermal Options: Not available
See more
1572-12-TL Series Two-Axis Table Systems: Cost-effective solution for testing small payloads under thermal conditions.
- Payload Capacity: 150 lbs (68 Kg)
- Max Rate:
Inner axis: up to 2000 deg/sec
Outer axis: up to 350 deg/sec
- Position Accuracy: ±30 arcsec
- Thermal Options: LN2-cooling
See more
1572P Series Two-Axis Table Systems: Higher dynamic performance and a large payload capacity with accuracies to meet most aerospace-quality applications
- Payload Capacity: 150 lbs (68 Kg)
- Max Rate:
Inner axis: up to 1800 deg/sec
Outer axis: up to 600 deg/sec
- Position Accuracy:
1572P10 Series: ±10 arcsec
1572P20 Series: ±20 arcsec
- Thermal Options:
1. LN2-cooled
2. CO2-cooled
3. Mechanical Refrigeration
See more
2002P Series Two-Axis Table Systems: Precision accuracies with high-dynamic performance and a large payload capacity.
- Payload Capacity: 150 lbs (68 Kg)
- Max Rate:
Inner axis: up to 1800 deg/sec
Outer axis: up to 600 deg/sec
- Position Accuracy: ±1 arcsec
- Thermal Options:
1. LN2-cooled
2. CO2-cooled
3. Mechanical Refrigeration
See more
Three-Axis Table Systems
2103HT Series Three-Axis Table Systems: Designed for applications with small payloads, low dynamic performance, and moderate accuracy requirements.
- Payload Capacity: 15 lbs (6.8 Kg)
- Max Rate:
Inner axis: up to 1000 deg/sec
Middle axis: up to 350 dec/sec
Outer axis: up to 350 deg/sec
- Position Accuracy: ±30 arcsec
- Thermal Options: Not available
See more
2103 Series Three-Axis Table Systems: Cost-effective solution for testing antenna stabilization systems. This table produces what is often referred to as an “ocean motion” stimulus.
- Payload Capacity: 100 lbs (46 Kg)
- Max Rate:
Inner axis: 100 deg/sec
Middle axis: 65 dec/sec
Outer axis: 65 deg/sec
- Position Accuracy: ±60 arcsec
- Thermal Options: Not available
See more
1573P Series Three-Axis Table Systems: Higher dynamic performance and a large payload capacity with accuracies to meet most aerospace-quality applications
- Payload Capacity: 150 lbs (68 Kg)
- Max Rate:
Inner axis: up to 1800 deg/sec
Middle axis: up to 600 dec/sec
Outer axis: up to 360 deg/sec
- Position Accuracy:
1573P10 Series: ±10 arcsec
1573P20 Series: ±10 arcsec
- Thermal Options:
1. LN2-cooled
2. CO2-cooled
3. Mechanical Refrigeration
See more
1583 Series Three-Axis Table Systems: High dynamic performance for HWIL testing of projectile guidance systems.
- * Capabilities vary by Model series
See more
2003P Series Three-Axis Table Systems: Precision accuracies with high-dynamic performance and a large payload capacity.
- Payload Capacity: 150 lbs (68 Kg)
- Max Rate:
Inner axis: up to 1800 deg/sec
Middle axis: up to 600 dec/sec
Outer axis: 360 deg/sec
- Position Accuracy: ±1 arcsec to ±2 arcsec
- Thermal Options:
1. LN2-cooled
2. CO2-cooled
3. Mechanical Refrigeration
See more