1583 Series Three Axis Position and Rate Table System

1583 SERIES THREE AXIS POSITION AND RATE TABLE SYSTEM

The 1583 Series Three Axis Positioning and Rate Table Systems are optimized to provide high-dynamic Hardware-in-the-Loop (HWIL) testing for smart weapons technology.

There are multiple variations of the 1583 Series to fit specific customer requirements, but all of the 1583 Tables are servo-controlled systems that feature direct-drive DC brushless motors, precision optical encoders and a microprocessor that provides accurate and reliable motion control. The table can be operated from the AERO 4000™ Controller front panel for local control or through a computer interface for remote control. This test table system is designed for ease of operation and is programmed with the Ideal Aerosmith Table Language (ATL) for remote operation.

In general, the table systems in the 1583 Series family exhibit high acceleration characteristics, and very high velocities for the roll axis. For special requirements, please contact Ideal Aerosmith regarding system customization.

  • Three Axis Position and Rate Table System 1583
  • Three Axis Position and Rate Table System 1583
  • Three Axis Position and Rate Table System 1583
  • Three Axis Position and Rate Table System 1593
Options available for

1583

  • Various slip ring packages or wire wrap configurations
  • High Frequency RF Rotary Joints
  • Fiber Optic Rotary Joints
  • High-Speed Reflective Memory Interfaces

Downloads

PDF files will open in browser upon download.
PDF 1583 Series Three Axis Position and Rate Table 108.1 kB - pdf DOWNLOAD

Standard Performance Specification & Features:

Payload Capacity: 40 lbs
Position Accuracy: ±30 arcsec
Maximum Rate:
  • Inner Axis: 1200 deg/sec
  • Middle Axis: 400 deg/sec
  • Outer Axis: 400 deg/sec
Offset: none. Tabletop is located at intersection of middle and outer axes

     

Model 1583G Specification & Features
Payload Capacity: 110 lbs
Position Accuracy: ±30 arcsec
Maximum Rate:
  • Inner Axis: 7200 deg/sec
  • Middle Axis: 350 deg/sec
  • Outer Axis: 350 deg/sec

 

Offset: Tabletop is located 12 inches behind intersection of middle and outer axes
Roll Axis can be removed to provide greater acceleration in a two-axis testing configuration

   

Model 1583F Specification & Features
Payload Capacity: 10 lbs
Position Accuracy:
  • Inner Axis: ±36 arcsec
  • Middle Axis: ±30 arcsec
  • Outer Axis: ±30 arcsec
Maximum Rate:
  • Inner Axis: 14,000-18,000 deg/sec
  • Middle Axis: 200 deg/sec
  • Outer Axis: 200 deg/sec
Offset: Tabletop is located 12 inches behind intersection of middle and outer axes
Roll drive can be removed to be used as a stand-alone single-axis spin fixture

                   

Features common to all 1583 Series Tables
Direct-drive, DC brushless servo system
Precision-ground anodized AL tabletop
Fail-safe brakes
High-precision, pre-loaded ball bearings
AERO 4000™ Controller in console
AERO 4000™ features
.NET interface over Ethernet
Front panel display of status and data
Local and remote operation
Motion simulation profile modes